Guide

Connect a Prop Over Bluetooth

PropPal talks to your prop directly over Bluetooth: no cables, no pairing codes, no account needed just to connect. Here's how to get from powered-on to controlling it.

Steps

1. 1

   Power on the prop

   Make sure it's plugged in or has fresh batteries, and that it isn't already connected to another app, including the manufacturer's own app. A prop can only talk to one app at a time.

2. 2

   Turn on Bluetooth

   Enable Bluetooth on the phone or computer you're using PropPal from.

3. 3

   Open the Props tab in PropPal

   Tap Connect a Prop and wait for it to appear in the scan list. It should show up within a few seconds if it's powered on and nearby.

4. 4

   Select your prop and confirm

   Tap it in the list. Once connected, you'll see its name confirmed as connected in the app.

5. 5

   Name it, if you have more than one

   Own two of the same model? Tap the pencil icon next to its name on the home screen to give it a custom label so you always know which one you're controlling.

Troubleshooting

1. 1

   My prop won't show up when scanning

   Make sure it's powered on, nearby, and not already connected to another phone or app. Also double-check Bluetooth is turned on for your device.

2. 2

   I can't connect to a second prop

   PropPal only stays connected to one prop at a time. If you're already connected somewhere and try to connect elsewhere, it'll ask if you want to disconnect first. Say yes and it'll switch over.